Skip to main content

SpecFlow Premium Self-Leveling Underlayment (Pack of 6)| Other Products

USD 81.33
Other Products / General Merchandise / Other Products
SpecFlow is a cement-based, self-leveling floor underlayment that creates a smooth, feather-edge-compatible subfloor for interior use
SpecFlow is a single-component, non-shrinking underlayment that seeks its own level once poured, eliminating the need for troweling. It prepares interior subfloors for carpet, tile adhesives, and other floor coverings, and can be applied from a feather edge up to 2 inches thick (up to 5 inches with added pea gravel).
Key Features & Benefits

Self-leveling formula eliminates the need for troweling
Versatile application thickness — feather edge up to 2 inches, or up to 5 inches with pea gravel
Fast setting — accepts foot traffic within 2-4 hours
High bond strength for long-lasting adhesion to the substrate
Compatible with adhesives for carpet, tile, and other floor coverings

Application Instructions

Prepare the substrate to a minimum CSP #3 profile, with shot blasting preferred; surface must be clean and free of dirt, grease, oil, paint, and loose material
Apply SpecPrime primer at approximately 100-150 sq ft per gallon with a brush or broom (not a roller), and allow it to dry completely — very porous surfaces may need a second coat
Pour 4 quarts of water into a mixing container, then add one 50 lb bag of SpecFlow
Mix with a heavy-duty drill and blending paddle for 2-3 minutes until smooth and free of lumps
Avoid overwatering or retempering the mix
Pour over the primed substrate and spread with a long-handled spreader — no troweling needed

Technical Data Summary

Set Time: Initial set at 50 minutes, final set at 80 minutes at 70°F

Compressive Strength: 3,000 psi at 1 day, 5,500 psi at 28 days

Flexural Strength: 1,150 psi at 28 days

Bond Strength: 1,000 psi at 14 days when used with SpecPrime

Coverage: Approximately 24 sq ft per 50 lb bag at 1/4 inch thickness

Shelf Life: 12 months when stored properly in a cool, dry location

Packaging
Available in 50 lb bags.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SFLOW-BAGTags:Cementitious Products and Liquids
View product
Product details
SpecFlow is a cement-based, self-leveling floor underlayment that creates a smooth, feather-edge-compatible subfloor for interior use
SpecFlow is a single-component, non-shrinking underlayment that seeks its own level once poured, eliminating the need for troweling. It prepares interior subfloors for carpet, tile adhesives, and other floor coverings, and can be applied from a feather edge up to 2 inches thick (up to 5 inches with added pea gravel).
Key Features & Benefits

Self-leveling formula eliminates the need for troweling
Versatile application thickness — feather edge up to 2 inches, or up to 5 inches with pea gravel
Fast setting — accepts foot traffic within 2-4 hours
High bond strength for long-lasting adhesion to the substrate
Compatible with adhesives for carpet, tile, and other floor coverings

Application Instructions

Prepare the substrate to a minimum CSP #3 profile, with shot blasting preferred; surface must be clean and free of dirt, grease, oil, paint, and loose material
Apply SpecPrime primer at approximately 100-150 sq ft per gallon with a brush or broom (not a roller), and allow it to dry completely — very porous surfaces may need a second coat
Pour 4 quarts of water into a mixing container, then add one 50 lb bag of SpecFlow
Mix with a heavy-duty drill and blending paddle for 2-3 minutes until smooth and free of lumps
Avoid overwatering or retempering the mix
Pour over the primed substrate and spread with a long-handled spreader — no troweling needed

Technical Data Summary

Set Time: Initial set at 50 minutes, final set at 80 minutes at 70°F

Compressive Strength: 3,000 psi at 1 day, 5,500 psi at 28 days

Flexural Strength: 1,150 psi at 28 days

Bond Strength: 1,000 psi at 14 days when used with SpecPrime

Coverage: Approximately 24 sq ft per 50 lb bag at 1/4 inch thickness

Shelf Life: 12 months when stored properly in a cool, dry location

Packaging
Available in 50 lb bags.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SFLOW-BAGTags:Cementitious Products and Liquids
Product information
COL-f43028bf5462cf5354438a4c1d91a837dcf1a991
Other Products / General Merchandise / Other Products
Stock and delivery

You may also like

    Other products

    Footnotes