No image available
CR1 Crank Arms (Spindle and Chainring not included)｜ Other Products
USD 59.37
Other Products / General Merchandise / Other Products
FEATURES
The CR1 platform was developed to eliminate the headaches of finding the right crankset for different bikes. With interchangeable spindle options and broad drivetrain compatibility, riders can configure the CR1 for everything from a dirt jumper to a World Cup downhill bike.
*Designed for SRAM DUB bottom brackets*
Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for enduro, freeride, and downhill mountain bikes
SPECIFICATIONS
Three-piece design
29mm crank spindle diameter
Aluminum pre-loader
Available in three lengths: 155mm, 160mm, 165mm
Machined from 7075 T6 aluminum
Anodized matte black or chrome finish
SRAM 8 bolt direct mount compatible only
Chainring Not included
Compatible with Title CR1 spindle
Compatible with SRAM Dub 29mm bottom bracket only. Not included
WHICH SPINDLE DO I NEED?
Choosing the correct spindle depends on your bike's frame and drivetrain setup. But as a general rule of thumb, compatibility is as follows:
130mm Spindle – Dirt Jump and non-Boost bikes
136mm Spindle – Most modern Trail and Enduro bikes with Boost spacing
145mm Spindle – Downhill bikes
If you're unsure which spindle is right for you, check your bike manufacturer's website for your specific bike's sizing and spacing or check out our compatibility chart.
CHAIN COMPATIBILITY BY CHAINRING:
SRAM T-Type = Compatible with SRAM T-Type 12-speed drivetrains only
Shimano HG 12 = Compatible with Shimano HG12 12-speed chains such as:
XTR CN-M9100/M9200
XT CN-M8100/M8200
SLX CN-M7100/M7200
Regular = Compatible with most 9-12 speed drivetrains including the following:
All 9, 10, 11, & 12-speed SRAM drivetrains
All 9, 10, & 11-speed Shimano drivetrains
All 9, 10, & 11-speed KMC chains
single speed setups
*Half link chains are not compatible*
Weights
165mm with 136mm spindle without chainring =
32T Chainring = 72g
Brand:Title MTBSKU:661317991810Tags:Shopify Collective, Title MTBColor:Black, ChromeCrank Arm Length:155mm, 160mm, 165mm
View productThe CR1 platform was developed to eliminate the headaches of finding the right crankset for different bikes. With interchangeable spindle options and broad drivetrain compatibility, riders can configure the CR1 for everything from a dirt jumper to a World Cup downhill bike.
*Designed for SRAM DUB bottom brackets*
Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for enduro, freeride, and downhill mountain bikes
SPECIFICATIONS
Three-piece design
29mm crank spindle diameter
Aluminum pre-loader
Available in three lengths: 155mm, 160mm, 165mm
Machined from 7075 T6 aluminum
Anodized matte black or chrome finish
SRAM 8 bolt direct mount compatible only
Chainring Not included
Compatible with Title CR1 spindle
Compatible with SRAM Dub 29mm bottom bracket only. Not included
WHICH SPINDLE DO I NEED?
Choosing the correct spindle depends on your bike's frame and drivetrain setup. But as a general rule of thumb, compatibility is as follows:
130mm Spindle – Dirt Jump and non-Boost bikes
136mm Spindle – Most modern Trail and Enduro bikes with Boost spacing
145mm Spindle – Downhill bikes
If you're unsure which spindle is right for you, check your bike manufacturer's website for your specific bike's sizing and spacing or check out our compatibility chart.
CHAIN COMPATIBILITY BY CHAINRING:
SRAM T-Type = Compatible with SRAM T-Type 12-speed drivetrains only
Shimano HG 12 = Compatible with Shimano HG12 12-speed chains such as:
XTR CN-M9100/M9200
XT CN-M8100/M8200
SLX CN-M7100/M7200
Regular = Compatible with most 9-12 speed drivetrains including the following:
All 9, 10, 11, & 12-speed SRAM drivetrains
All 9, 10, & 11-speed Shimano drivetrains
All 9, 10, & 11-speed KMC chains
single speed setups
*Half link chains are not compatible*
Weights
165mm with 136mm spindle without chainring =
32T Chainring = 72g
Brand:Title MTBSKU:661317991810Tags:Shopify Collective, Title MTBColor:Black, ChromeCrank Arm Length:155mm, 160mm, 165mm
Product details
FEATURES
The CR1 platform was developed to eliminate the headaches of finding the right crankset for different bikes. With interchangeable spindle options and broad drivetrain compatibility, riders can configure the CR1 for everything from a dirt jumper to a World Cup downhill bike.
*Designed for SRAM DUB bottom brackets*
Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for enduro, freeride, and downhill mountain bikes
SPECIFICATIONS
Three-piece design
29mm crank spindle diameter
Aluminum pre-loader
Available in three lengths: 155mm, 160mm, 165mm
Machined from 7075 T6 aluminum
Anodized matte black or chrome finish
SRAM 8 bolt direct mount compatible only
Chainring Not included
Compatible with Title CR1 spindle
Compatible with SRAM Dub 29mm bottom bracket only. Not included
WHICH SPINDLE DO I NEED?
Choosing the correct spindle depends on your bike's frame and drivetrain setup. But as a general rule of thumb, compatibility is as follows:
130mm Spindle – Dirt Jump and non-Boost bikes
136mm Spindle – Most modern Trail and Enduro bikes with Boost spacing
145mm Spindle – Downhill bikes
If you're unsure which spindle is right for you, check your bike manufacturer's website for your specific bike's sizing and spacing or check out our compatibility chart.
CHAIN COMPATIBILITY BY CHAINRING:
SRAM T-Type = Compatible with SRAM T-Type 12-speed drivetrains only
Shimano HG 12 = Compatible with Shimano HG12 12-speed chains such as:
XTR CN-M9100/M9200
XT CN-M8100/M8200
SLX CN-M7100/M7200
Regular = Compatible with most 9-12 speed drivetrains including the following:
All 9, 10, 11, & 12-speed SRAM drivetrains
All 9, 10, & 11-speed Shimano drivetrains
All 9, 10, & 11-speed KMC chains
single speed setups
*Half link chains are not compatible*
Weights
165mm with 136mm spindle without chainring =
32T Chainring = 72g
Brand:Title MTBSKU:661317991810Tags:Shopify Collective, Title MTBColor:Black, ChromeCrank Arm Length:155mm, 160mm, 165mm
The CR1 platform was developed to eliminate the headaches of finding the right crankset for different bikes. With interchangeable spindle options and broad drivetrain compatibility, riders can configure the CR1 for everything from a dirt jumper to a World Cup downhill bike.
*Designed for SRAM DUB bottom brackets*
Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for enduro, freeride, and downhill mountain bikes
SPECIFICATIONS
Three-piece design
29mm crank spindle diameter
Aluminum pre-loader
Available in three lengths: 155mm, 160mm, 165mm
Machined from 7075 T6 aluminum
Anodized matte black or chrome finish
SRAM 8 bolt direct mount compatible only
Chainring Not included
Compatible with Title CR1 spindle
Compatible with SRAM Dub 29mm bottom bracket only. Not included
WHICH SPINDLE DO I NEED?
Choosing the correct spindle depends on your bike's frame and drivetrain setup. But as a general rule of thumb, compatibility is as follows:
130mm Spindle – Dirt Jump and non-Boost bikes
136mm Spindle – Most modern Trail and Enduro bikes with Boost spacing
145mm Spindle – Downhill bikes
If you're unsure which spindle is right for you, check your bike manufacturer's website for your specific bike's sizing and spacing or check out our compatibility chart.
CHAIN COMPATIBILITY BY CHAINRING:
SRAM T-Type = Compatible with SRAM T-Type 12-speed drivetrains only
Shimano HG 12 = Compatible with Shimano HG12 12-speed chains such as:
XTR CN-M9100/M9200
XT CN-M8100/M8200
SLX CN-M7100/M7200
Regular = Compatible with most 9-12 speed drivetrains including the following:
All 9, 10, 11, & 12-speed SRAM drivetrains
All 9, 10, & 11-speed Shimano drivetrains
All 9, 10, & 11-speed KMC chains
single speed setups
*Half link chains are not compatible*
Weights
165mm with 136mm spindle without chainring =
32T Chainring = 72g
Brand:Title MTBSKU:661317991810Tags:Shopify Collective, Title MTBColor:Black, ChromeCrank Arm Length:155mm, 160mm, 165mm
Product information
COL-2c719ccae7ee14a8dcc3b0c7bd746fd75bd1667f
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
