



No image available
Other Products |Bellari: SE560 Sonic Exciter Sound Enhancer
USD 32.70
Other Products / General Merchandise / Other Products
LAB POINTS
colorizes the sound of your turntable by adding depth and definition
rotary "bottom" (low) + "definition" (high) controls allow custom equalization + adds color to the sound
RCA + 3.5mm line level inputs (pre-amp required)
ultra quiet operation
rotary volume control on front side
all metal casing, hand built in Salt Lake City, Utah
"What does the SE560 do exactly? Quite honestly, it makes things sound better. It can be used as a stand alone preamplifier (not a phono stage). With 19.1 dB of gain it has more output potential than most preamps built. Simply plug you source into the SE560 and from there to your amplifier. It can fill the role of a turntable-cartridge only improvement in your system. From your phono pre (or directly from your turntable if it has a phono pre built in) to the SE560 then to your preamp or power amp. It also can act as a whole system enhancer by plugging your preamp into the SE560 then to your amplifier." - Bellari
KEY FEATURES
gain: 19.1 dB gain @ 1kHz
input Impedance: 1k
output impedance: 100 ohms RCA
frequency response: 3Hz to 31kHz
THD: .003% @ 1KHz
S/N Ratio: >100 dB unweighted
dimensions: 5.5"w x 3.5"d x 1.25"h / 140 x 89 x 32mm
weight: .8 lbs / 362g
COMES WITH
power supply
Brand:BellariCategory:_STEREO-COMP-amp2SKU:eq-1363
View productcolorizes the sound of your turntable by adding depth and definition
rotary "bottom" (low) + "definition" (high) controls allow custom equalization + adds color to the sound
RCA + 3.5mm line level inputs (pre-amp required)
ultra quiet operation
rotary volume control on front side
all metal casing, hand built in Salt Lake City, Utah
"What does the SE560 do exactly? Quite honestly, it makes things sound better. It can be used as a stand alone preamplifier (not a phono stage). With 19.1 dB of gain it has more output potential than most preamps built. Simply plug you source into the SE560 and from there to your amplifier. It can fill the role of a turntable-cartridge only improvement in your system. From your phono pre (or directly from your turntable if it has a phono pre built in) to the SE560 then to your preamp or power amp. It also can act as a whole system enhancer by plugging your preamp into the SE560 then to your amplifier." - Bellari
KEY FEATURES
gain: 19.1 dB gain @ 1kHz
input Impedance: 1k
output impedance: 100 ohms RCA
frequency response: 3Hz to 31kHz
THD: .003% @ 1KHz
S/N Ratio: >100 dB unweighted
dimensions: 5.5"w x 3.5"d x 1.25"h / 140 x 89 x 32mm
weight: .8 lbs / 362g
COMES WITH
power supply
Brand:BellariCategory:_STEREO-COMP-amp2SKU:eq-1363
Product details
LAB POINTS
colorizes the sound of your turntable by adding depth and definition
rotary "bottom" (low) + "definition" (high) controls allow custom equalization + adds color to the sound
RCA + 3.5mm line level inputs (pre-amp required)
ultra quiet operation
rotary volume control on front side
all metal casing, hand built in Salt Lake City, Utah
"What does the SE560 do exactly? Quite honestly, it makes things sound better. It can be used as a stand alone preamplifier (not a phono stage). With 19.1 dB of gain it has more output potential than most preamps built. Simply plug you source into the SE560 and from there to your amplifier. It can fill the role of a turntable-cartridge only improvement in your system. From your phono pre (or directly from your turntable if it has a phono pre built in) to the SE560 then to your preamp or power amp. It also can act as a whole system enhancer by plugging your preamp into the SE560 then to your amplifier." - Bellari
KEY FEATURES
gain: 19.1 dB gain @ 1kHz
input Impedance: 1k
output impedance: 100 ohms RCA
frequency response: 3Hz to 31kHz
THD: .003% @ 1KHz
S/N Ratio: >100 dB unweighted
dimensions: 5.5"w x 3.5"d x 1.25"h / 140 x 89 x 32mm
weight: .8 lbs / 362g
COMES WITH
power supply
Brand:BellariCategory:_STEREO-COMP-amp2SKU:eq-1363
colorizes the sound of your turntable by adding depth and definition
rotary "bottom" (low) + "definition" (high) controls allow custom equalization + adds color to the sound
RCA + 3.5mm line level inputs (pre-amp required)
ultra quiet operation
rotary volume control on front side
all metal casing, hand built in Salt Lake City, Utah
"What does the SE560 do exactly? Quite honestly, it makes things sound better. It can be used as a stand alone preamplifier (not a phono stage). With 19.1 dB of gain it has more output potential than most preamps built. Simply plug you source into the SE560 and from there to your amplifier. It can fill the role of a turntable-cartridge only improvement in your system. From your phono pre (or directly from your turntable if it has a phono pre built in) to the SE560 then to your preamp or power amp. It also can act as a whole system enhancer by plugging your preamp into the SE560 then to your amplifier." - Bellari
KEY FEATURES
gain: 19.1 dB gain @ 1kHz
input Impedance: 1k
output impedance: 100 ohms RCA
frequency response: 3Hz to 31kHz
THD: .003% @ 1KHz
S/N Ratio: >100 dB unweighted
dimensions: 5.5"w x 3.5"d x 1.25"h / 140 x 89 x 32mm
weight: .8 lbs / 362g
COMES WITH
power supply
Brand:BellariCategory:_STEREO-COMP-amp2SKU:eq-1363
Product information
COL-097ed147956d266fe90929004c2175d5551e6794
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
















![Upgraded Version| Other Products |Bijzettafel Ledepid ronde tafelblad naturel [en.casa]](https://cdn.shopify.com/s/files/1/0902/7466/0733/files/Beistelltisch-Nebentisch-Sofatisch-Telefontisch_PXCH-0085_beispiel.jpg)


