ZL1 Addons Custom 1/4-20 Rivnut Install Tool｜ Tools & Hardware

Our in house custom made 1/4"-20 rivnut install tool is designed to lower the cost of entry for the tools required to install our Wicker Bills and Splitters. This setup is hand made and designed to be used with a 3/8" wrench. The process is more manual vs. our other tools offered, but the savings are substantial. 
How it Works: 

You will mark and drill out your rivnut install locations and thread a 1/4-20 rivnut until it is flush with the metal handle. Slide the rivnut into the pre-drilled hole and hold the tool steady. Now use a 3/8" wrench to tighten the coupling nut which will in turn pull the rivnut tight (you will need to apply pressure on the rivnut to keep it from spinning). Do NOT overtighten the rivnut, you want to pull it until it is tight into position, that is all that is required.  

Shipping:

This product is built by our team here in Poway, CA. We will work to keep sufficient inventory, but we may take a day or two to ship if inventory is low. 

Note:

This product will not work with our 10/32 rivnuts, please see our custom 10/32 rivnut install tool.

Product Use Video:

Please note, we're showing a rivnut being installed on a piece of lexan in this video, the rivnut will be installed into your spoiler, but the video is only to show how the tool works. 
Brand:ZL1 AddonsCategory:AccessoriesSKU:05000001Tags:1/4-20 rivnut install tool, addons, rivet, rivet gun, rivnut, rivnut gun, rivnut install tool, tool, wickerbills, ZL1