
No image available
Featured Detail| Other Products |GrindLazer HP DC1013 G Gas-Powered Scarifier
USD 3,810.00
Other Products / General Merchandise / Other Products
The GrindLazer HP DC1013 G is a high-production, walk-behind drum scarifier designed for demanding concrete and asphalt surface preparation applications. It is commonly used for removing traffic lines, coatings, surface irregularities, and for light profiling of concrete slabs.
Built for contractor-grade durability, it combines a Honda-powered 13 HP engine with a precision drum cutting system and optional ride-on LineDriver compatibility for increased productivity.
Key Applications
Parking lot line removal (paint, epoxy, thermoplastic)
Intersection and roadway marking removal
Concrete surface leveling and profiling
Pavement and sidewalk texturing
Coating removal and surface prep before overlays
Core Features
TriBelt Drive System – improves torque transfer and reduces belt wear and downtime
Fat Track Front Swivel Wheel – improves maneuverability and turning radius
EasyGlide Wheel System – reduces vibration and improves operator control
Vacuum Port (Dust Control Ready) – connects to LazerVac systems for silica dust reduction
LineDriver Compatible – converts to ride-on operation for significantly higher production rates
Heavy-Duty Steel Frame – built for DOT and contractor abuse environments
Forward Cutting Drum Design – optimized for controlled, consistent material removal
Operational Specifications
UPC PRODUCT
755652779025
DIVISION
CED
FAMILY CODE
FAMGZU
COUNTRY OF ORIGIN
US
UNIT OF MEASURE
EA
HEIGHT
53.5 IN | 135.890 CM
LENGTH
31.75 IN | 80.645 CM
WIDTH
69.5 IN | 176.530 CM
VOLUME
68.319 FT3 | 1.935 M3
SHIPPING WEIGHT
393 LBS | 178.262 KG
HTS CODE (US)
8479100080
HTS CODE (CA)
8479100090
Technical Specifications
AIR FILTER TYPE
Cyclone
SERIES
High Production Series
VACUUM PORT
Yes
PRODUCT SERIES
High Production
MODEL
GrindLazer
MAXIMUM CUT WIDTH (MM)
254
MAXIMUM CUT WIDTH (IN)
10
MAXIMUM CUT WIDTH (CM)
25
MAXIMUM CUT RATE W/ LINEDRIVER (FT2/HR)
1700
MAXIMUM CUT RATE (FT2/HR)
800
LINEDRIVER REQUIRED
Optional
ENGINE START TYPE
ProStart
ENGINE SIZE (HP)
13
ENGINE MODEL
GX390
ENGINE BRAND
Honda
DEPTH_ADJUSTMENT
Manual
CUTTER DRUM DIAMETER (IN)
5
WATER CONNECTION
Optional
Performance Notes
Designed for medium-to-heavy surface removal
Best suited for line removal and shallow milling
Not intended for full-depth concrete demolition
Included / System Notes
Scarifier machine (base unit)
Drum system (config varies by cutter type)
Operator controls + depth adjustment system
Vacuum port for dust collection integration
Optional Accessories
LineDriver ride-on system (productivity booster)
LazerVac dust collection system
Various cutter drums (PCD, carbide, specialty cutting heads)
Water suppression kit (site dependent)
Manuals & Documents
Operation Manual
Manufacturer Positioning
This model sits in the High Production Series, meaning:
higher daily production output vs entry-level scarifiers
designed for commercial contractors and DOT work
supports continuous, high-load operation
Brand:GrindlazerSKU:25M993Tags:Concrete Scarifiers
View productBuilt for contractor-grade durability, it combines a Honda-powered 13 HP engine with a precision drum cutting system and optional ride-on LineDriver compatibility for increased productivity.
Key Applications
Parking lot line removal (paint, epoxy, thermoplastic)
Intersection and roadway marking removal
Concrete surface leveling and profiling
Pavement and sidewalk texturing
Coating removal and surface prep before overlays
Core Features
TriBelt Drive System – improves torque transfer and reduces belt wear and downtime
Fat Track Front Swivel Wheel – improves maneuverability and turning radius
EasyGlide Wheel System – reduces vibration and improves operator control
Vacuum Port (Dust Control Ready) – connects to LazerVac systems for silica dust reduction
LineDriver Compatible – converts to ride-on operation for significantly higher production rates
Heavy-Duty Steel Frame – built for DOT and contractor abuse environments
Forward Cutting Drum Design – optimized for controlled, consistent material removal
Operational Specifications
UPC PRODUCT
755652779025
DIVISION
CED
FAMILY CODE
FAMGZU
COUNTRY OF ORIGIN
US
UNIT OF MEASURE
EA
HEIGHT
53.5 IN | 135.890 CM
LENGTH
31.75 IN | 80.645 CM
WIDTH
69.5 IN | 176.530 CM
VOLUME
68.319 FT3 | 1.935 M3
SHIPPING WEIGHT
393 LBS | 178.262 KG
HTS CODE (US)
8479100080
HTS CODE (CA)
8479100090
Technical Specifications
AIR FILTER TYPE
Cyclone
SERIES
High Production Series
VACUUM PORT
Yes
PRODUCT SERIES
High Production
MODEL
GrindLazer
MAXIMUM CUT WIDTH (MM)
254
MAXIMUM CUT WIDTH (IN)
10
MAXIMUM CUT WIDTH (CM)
25
MAXIMUM CUT RATE W/ LINEDRIVER (FT2/HR)
1700
MAXIMUM CUT RATE (FT2/HR)
800
LINEDRIVER REQUIRED
Optional
ENGINE START TYPE
ProStart
ENGINE SIZE (HP)
13
ENGINE MODEL
GX390
ENGINE BRAND
Honda
DEPTH_ADJUSTMENT
Manual
CUTTER DRUM DIAMETER (IN)
5
WATER CONNECTION
Optional
Performance Notes
Designed for medium-to-heavy surface removal
Best suited for line removal and shallow milling
Not intended for full-depth concrete demolition
Included / System Notes
Scarifier machine (base unit)
Drum system (config varies by cutter type)
Operator controls + depth adjustment system
Vacuum port for dust collection integration
Optional Accessories
LineDriver ride-on system (productivity booster)
LazerVac dust collection system
Various cutter drums (PCD, carbide, specialty cutting heads)
Water suppression kit (site dependent)
Manuals & Documents
Operation Manual
Manufacturer Positioning
This model sits in the High Production Series, meaning:
higher daily production output vs entry-level scarifiers
designed for commercial contractors and DOT work
supports continuous, high-load operation
Brand:GrindlazerSKU:25M993Tags:Concrete Scarifiers
Product details
The GrindLazer HP DC1013 G is a high-production, walk-behind drum scarifier designed for demanding concrete and asphalt surface preparation applications. It is commonly used for removing traffic lines, coatings, surface irregularities, and for light profiling of concrete slabs.
Built for contractor-grade durability, it combines a Honda-powered 13 HP engine with a precision drum cutting system and optional ride-on LineDriver compatibility for increased productivity.
Key Applications
Parking lot line removal (paint, epoxy, thermoplastic)
Intersection and roadway marking removal
Concrete surface leveling and profiling
Pavement and sidewalk texturing
Coating removal and surface prep before overlays
Core Features
TriBelt Drive System – improves torque transfer and reduces belt wear and downtime
Fat Track Front Swivel Wheel – improves maneuverability and turning radius
EasyGlide Wheel System – reduces vibration and improves operator control
Vacuum Port (Dust Control Ready) – connects to LazerVac systems for silica dust reduction
LineDriver Compatible – converts to ride-on operation for significantly higher production rates
Heavy-Duty Steel Frame – built for DOT and contractor abuse environments
Forward Cutting Drum Design – optimized for controlled, consistent material removal
Operational Specifications
UPC PRODUCT
755652779025
DIVISION
CED
FAMILY CODE
FAMGZU
COUNTRY OF ORIGIN
US
UNIT OF MEASURE
EA
HEIGHT
53.5 IN | 135.890 CM
LENGTH
31.75 IN | 80.645 CM
WIDTH
69.5 IN | 176.530 CM
VOLUME
68.319 FT3 | 1.935 M3
SHIPPING WEIGHT
393 LBS | 178.262 KG
HTS CODE (US)
8479100080
HTS CODE (CA)
8479100090
Technical Specifications
AIR FILTER TYPE
Cyclone
SERIES
High Production Series
VACUUM PORT
Yes
PRODUCT SERIES
High Production
MODEL
GrindLazer
MAXIMUM CUT WIDTH (MM)
254
MAXIMUM CUT WIDTH (IN)
10
MAXIMUM CUT WIDTH (CM)
25
MAXIMUM CUT RATE W/ LINEDRIVER (FT2/HR)
1700
MAXIMUM CUT RATE (FT2/HR)
800
LINEDRIVER REQUIRED
Optional
ENGINE START TYPE
ProStart
ENGINE SIZE (HP)
13
ENGINE MODEL
GX390
ENGINE BRAND
Honda
DEPTH_ADJUSTMENT
Manual
CUTTER DRUM DIAMETER (IN)
5
WATER CONNECTION
Optional
Performance Notes
Designed for medium-to-heavy surface removal
Best suited for line removal and shallow milling
Not intended for full-depth concrete demolition
Included / System Notes
Scarifier machine (base unit)
Drum system (config varies by cutter type)
Operator controls + depth adjustment system
Vacuum port for dust collection integration
Optional Accessories
LineDriver ride-on system (productivity booster)
LazerVac dust collection system
Various cutter drums (PCD, carbide, specialty cutting heads)
Water suppression kit (site dependent)
Manuals & Documents
Operation Manual
Manufacturer Positioning
This model sits in the High Production Series, meaning:
higher daily production output vs entry-level scarifiers
designed for commercial contractors and DOT work
supports continuous, high-load operation
Brand:GrindlazerSKU:25M993Tags:Concrete Scarifiers
Built for contractor-grade durability, it combines a Honda-powered 13 HP engine with a precision drum cutting system and optional ride-on LineDriver compatibility for increased productivity.
Key Applications
Parking lot line removal (paint, epoxy, thermoplastic)
Intersection and roadway marking removal
Concrete surface leveling and profiling
Pavement and sidewalk texturing
Coating removal and surface prep before overlays
Core Features
TriBelt Drive System – improves torque transfer and reduces belt wear and downtime
Fat Track Front Swivel Wheel – improves maneuverability and turning radius
EasyGlide Wheel System – reduces vibration and improves operator control
Vacuum Port (Dust Control Ready) – connects to LazerVac systems for silica dust reduction
LineDriver Compatible – converts to ride-on operation for significantly higher production rates
Heavy-Duty Steel Frame – built for DOT and contractor abuse environments
Forward Cutting Drum Design – optimized for controlled, consistent material removal
Operational Specifications
UPC PRODUCT
755652779025
DIVISION
CED
FAMILY CODE
FAMGZU
COUNTRY OF ORIGIN
US
UNIT OF MEASURE
EA
HEIGHT
53.5 IN | 135.890 CM
LENGTH
31.75 IN | 80.645 CM
WIDTH
69.5 IN | 176.530 CM
VOLUME
68.319 FT3 | 1.935 M3
SHIPPING WEIGHT
393 LBS | 178.262 KG
HTS CODE (US)
8479100080
HTS CODE (CA)
8479100090
Technical Specifications
AIR FILTER TYPE
Cyclone
SERIES
High Production Series
VACUUM PORT
Yes
PRODUCT SERIES
High Production
MODEL
GrindLazer
MAXIMUM CUT WIDTH (MM)
254
MAXIMUM CUT WIDTH (IN)
10
MAXIMUM CUT WIDTH (CM)
25
MAXIMUM CUT RATE W/ LINEDRIVER (FT2/HR)
1700
MAXIMUM CUT RATE (FT2/HR)
800
LINEDRIVER REQUIRED
Optional
ENGINE START TYPE
ProStart
ENGINE SIZE (HP)
13
ENGINE MODEL
GX390
ENGINE BRAND
Honda
DEPTH_ADJUSTMENT
Manual
CUTTER DRUM DIAMETER (IN)
5
WATER CONNECTION
Optional
Performance Notes
Designed for medium-to-heavy surface removal
Best suited for line removal and shallow milling
Not intended for full-depth concrete demolition
Included / System Notes
Scarifier machine (base unit)
Drum system (config varies by cutter type)
Operator controls + depth adjustment system
Vacuum port for dust collection integration
Optional Accessories
LineDriver ride-on system (productivity booster)
LazerVac dust collection system
Various cutter drums (PCD, carbide, specialty cutting heads)
Water suppression kit (site dependent)
Manuals & Documents
Operation Manual
Manufacturer Positioning
This model sits in the High Production Series, meaning:
higher daily production output vs entry-level scarifiers
designed for commercial contractors and DOT work
supports continuous, high-load operation
Brand:GrindlazerSKU:25M993Tags:Concrete Scarifiers
Product information
COL-b82d430a16512e710ca0e83569c876f92450a214
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products



















