SpecPoxy Grout (High Performance Epoxy Grout)｜ Other Products

SpecPoxy Grout is a three-component, 100% solids epoxy grout built for high-strength grouting and anchoring in demanding, dynamically loaded applications
SpecPoxy Grout blends a high-strength epoxy resin and curing agent with a specially engineered graded aggregate for excellent flow in a uniform matrix. Its low-exotherm resin allows a long work time and deep-pour capability up to 18 inches in a single lift.
Key Features & Benefits

High-flow aggregate blend without segregation
Excellent volume stability for maximum bond and load transfer under dynamic loading
Fast cure and high early strength to reduce downtime
High compressive, bond, and tensile strength
Pre-measured proportions for straightforward installation
Superior abrasion and chemical resistance
Low exotherm resin for deep pours up to 18"
USDA accepted for food processing applications

Application Instructions

Anchor bolt holes must be clean and dry
Pour continuously to avoid air voids, maintaining full contact with the base plate
Place from a minimum of 1.0" to a maximum of 18" thick per lift
Use full aggregate for applications over 6" deep
Remove uncured material with SpecChem Solvent 100, Orange Peel, or another approved solvent

Technical Data Summary

Compressive Strength (ASTM C579, full extension): 10,100 psi at 1 day, 13,350 psi at 7 days, 14,650 psi at 14 days

Compressive Modulus (ASTM C580): 2,000,000 psi

Linear Shrinkage (ASTM C531): Negligible

Shelf Life: 2 years from manufacture date, stored in original tightly closed containers

Packaging
Available in 0.5 and 2.0 cubic foot units.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SPGROUT-1/2Tags:Cementitious Products and LiquidsSize:0.5 cu ft unit, 2.0 cu ft unit