


No image available
A Closer View|Pro-Ject: 6Perspex SB Balanced Acrylic Turntable w/ Pick It MC3 (Installed)| Other Products
USD 899.70
Other Products / General Merchandise / Other Products
LAB POINTS
high-end audiophile turntable made from a combination of unique materials including acrylic, Corian, carbon fiber, MDF, and metal.
includes Pick It MC3 Moving Coil Cartridge pre-installed ($680 value)
quiet belt drive operation w/ AC motor (DC driven AC generator)
Corian sub-chassis with magnetic suspension
resonance-optimized sandwich construction of platter w/ combination of MDF and vinyl layer + screw down record clamp
inverted main bearing with ceramic ball/plate
electronic speed control w/ 33/45 switching
carbon fiber Pro-Ject 9cc Evolution tonearm
Balanced mini XLR output & RCA/ground output
top grade RCA cable included (Pro-Ject Connect It E)
dust cover included
"Pro-ject's 6 PerspeX SB turntable delivers high end sound and functionality with stunning good looks. The acrylic plinth is the first thing you notice, a unique detail that is visibly appealing, that stands on three height adjustable TPE damped aluminum cones. The Corian sub-chassis rests on three magnetic fields that create a suspension system that avoids parasitic noise normally caused by con-ventional spring mechanisms. The resonance-optimized sandwich construction of the platter (a combination of MDF and vinyl layer + screw down record clamp) runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The pre-mounted 9" carbon fiber Pro-Ject 9cc Evolution tonearm rounds out this premium system. Comes complete with dustcover, counterweights, top grade RCA connection cable (Pro-Ject Connect It E), and pre-mounted Pick It MC3 cartridge." - TTL
TECH SPECS
speed: 33/45 (electronic speed change)
belt drive operation
platter: MDF/vinyl Sandwich (300mm diameter)
mains bearing: inverted stainless steel with ceramic ball/plate
wow & flutter: 33 +/-0.10% / 45 +/- 0.10%
speed drift: 33 +/-0.10% / 45 +/- 0.06%
signal to noise: 73dB
tonearm: 9" 9cc EVO Carbon
tonearm bearings with ABEC 7 ballraces
tracking force: 10 - 35mN
supplied counterweights: 5 - 7.5gr / 7 - 10gr / 9 - 11gr / 10 - 14gr
external power supply: 15 volts DC / 800mA
power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
dimensions: 18" x 7.2" x 14.3" / 460 x 183 x 365mm
weight: 24.2 lbs / 11 kg
Pick It MC3 Specs
output voltage (1 kHz): 0.4mV (3.54cm/sec)
channel separation (1 kHz): 30dB
tracking ability (315Hz): 70μm
frequency response: 20Hz-20kHz (+/- 1dB)
stylus type: hyper-spherical
stylus tip radius: 5 x 250μm
tracking force range: 1.8-2.2g (18-22mN)
recommended tracking force: 2g (20mN)
tracking angle: 20°
recommended load resistance: 100-220Ω
cartridge weight: 9.6g
break-in period: 30 hours
COMES WITH
Pick It MC3 (pre-mounted)
Connect It E RCA Phono cable
record clamp
dust cover
ABOUT TRUE BALANCED AUDIO
True Balanced Audio refers to a superior audio signal that results in higher sound quality with nearly zero background noise, check out our in-depth guide here
True Balanced gear can be utilized as both balanced (with the proper components and signal path) or non-balanced
True Balanced Audio requires a moving coil cartridge (MC) or the Pro-Ject Pick it Pro Balanced MM Cartridge
True Balanced Audio requires a balanced audio cable (5-Pin DIN, mini XLR / XLR, or RCA > Mini XLR) connected from the turntable to the preamp
True Balanced Audio requires a preamp that accepts balanced cables; you can output either XLR (recommended) or RCA from the preamp to speakers / amplifier
shop all Pro-Ject True Balanced
Brand:Pro-JectCategory:_STEREO-COMP-turntableSKU:tr-811Tags:Pro-Ject High-End, Pro-Ject True Balanced, Pro-Ject Turntables, turntablestype:Acrylic
View producthigh-end audiophile turntable made from a combination of unique materials including acrylic, Corian, carbon fiber, MDF, and metal.
includes Pick It MC3 Moving Coil Cartridge pre-installed ($680 value)
quiet belt drive operation w/ AC motor (DC driven AC generator)
Corian sub-chassis with magnetic suspension
resonance-optimized sandwich construction of platter w/ combination of MDF and vinyl layer + screw down record clamp
inverted main bearing with ceramic ball/plate
electronic speed control w/ 33/45 switching
carbon fiber Pro-Ject 9cc Evolution tonearm
Balanced mini XLR output & RCA/ground output
top grade RCA cable included (Pro-Ject Connect It E)
dust cover included
"Pro-ject's 6 PerspeX SB turntable delivers high end sound and functionality with stunning good looks. The acrylic plinth is the first thing you notice, a unique detail that is visibly appealing, that stands on three height adjustable TPE damped aluminum cones. The Corian sub-chassis rests on three magnetic fields that create a suspension system that avoids parasitic noise normally caused by con-ventional spring mechanisms. The resonance-optimized sandwich construction of the platter (a combination of MDF and vinyl layer + screw down record clamp) runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The pre-mounted 9" carbon fiber Pro-Ject 9cc Evolution tonearm rounds out this premium system. Comes complete with dustcover, counterweights, top grade RCA connection cable (Pro-Ject Connect It E), and pre-mounted Pick It MC3 cartridge." - TTL
TECH SPECS
speed: 33/45 (electronic speed change)
belt drive operation
platter: MDF/vinyl Sandwich (300mm diameter)
mains bearing: inverted stainless steel with ceramic ball/plate
wow & flutter: 33 +/-0.10% / 45 +/- 0.10%
speed drift: 33 +/-0.10% / 45 +/- 0.06%
signal to noise: 73dB
tonearm: 9" 9cc EVO Carbon
tonearm bearings with ABEC 7 ballraces
tracking force: 10 - 35mN
supplied counterweights: 5 - 7.5gr / 7 - 10gr / 9 - 11gr / 10 - 14gr
external power supply: 15 volts DC / 800mA
power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
dimensions: 18" x 7.2" x 14.3" / 460 x 183 x 365mm
weight: 24.2 lbs / 11 kg
Pick It MC3 Specs
output voltage (1 kHz): 0.4mV (3.54cm/sec)
channel separation (1 kHz): 30dB
tracking ability (315Hz): 70μm
frequency response: 20Hz-20kHz (+/- 1dB)
stylus type: hyper-spherical
stylus tip radius: 5 x 250μm
tracking force range: 1.8-2.2g (18-22mN)
recommended tracking force: 2g (20mN)
tracking angle: 20°
recommended load resistance: 100-220Ω
cartridge weight: 9.6g
break-in period: 30 hours
COMES WITH
Pick It MC3 (pre-mounted)
Connect It E RCA Phono cable
record clamp
dust cover
ABOUT TRUE BALANCED AUDIO
True Balanced Audio refers to a superior audio signal that results in higher sound quality with nearly zero background noise, check out our in-depth guide here
True Balanced gear can be utilized as both balanced (with the proper components and signal path) or non-balanced
True Balanced Audio requires a moving coil cartridge (MC) or the Pro-Ject Pick it Pro Balanced MM Cartridge
True Balanced Audio requires a balanced audio cable (5-Pin DIN, mini XLR / XLR, or RCA > Mini XLR) connected from the turntable to the preamp
True Balanced Audio requires a preamp that accepts balanced cables; you can output either XLR (recommended) or RCA from the preamp to speakers / amplifier
shop all Pro-Ject True Balanced
Brand:Pro-JectCategory:_STEREO-COMP-turntableSKU:tr-811Tags:Pro-Ject High-End, Pro-Ject True Balanced, Pro-Ject Turntables, turntablestype:Acrylic
Product details
LAB POINTS
high-end audiophile turntable made from a combination of unique materials including acrylic, Corian, carbon fiber, MDF, and metal.
includes Pick It MC3 Moving Coil Cartridge pre-installed ($680 value)
quiet belt drive operation w/ AC motor (DC driven AC generator)
Corian sub-chassis with magnetic suspension
resonance-optimized sandwich construction of platter w/ combination of MDF and vinyl layer + screw down record clamp
inverted main bearing with ceramic ball/plate
electronic speed control w/ 33/45 switching
carbon fiber Pro-Ject 9cc Evolution tonearm
Balanced mini XLR output & RCA/ground output
top grade RCA cable included (Pro-Ject Connect It E)
dust cover included
"Pro-ject's 6 PerspeX SB turntable delivers high end sound and functionality with stunning good looks. The acrylic plinth is the first thing you notice, a unique detail that is visibly appealing, that stands on three height adjustable TPE damped aluminum cones. The Corian sub-chassis rests on three magnetic fields that create a suspension system that avoids parasitic noise normally caused by con-ventional spring mechanisms. The resonance-optimized sandwich construction of the platter (a combination of MDF and vinyl layer + screw down record clamp) runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The pre-mounted 9" carbon fiber Pro-Ject 9cc Evolution tonearm rounds out this premium system. Comes complete with dustcover, counterweights, top grade RCA connection cable (Pro-Ject Connect It E), and pre-mounted Pick It MC3 cartridge." - TTL
TECH SPECS
speed: 33/45 (electronic speed change)
belt drive operation
platter: MDF/vinyl Sandwich (300mm diameter)
mains bearing: inverted stainless steel with ceramic ball/plate
wow & flutter: 33 +/-0.10% / 45 +/- 0.10%
speed drift: 33 +/-0.10% / 45 +/- 0.06%
signal to noise: 73dB
tonearm: 9" 9cc EVO Carbon
tonearm bearings with ABEC 7 ballraces
tracking force: 10 - 35mN
supplied counterweights: 5 - 7.5gr / 7 - 10gr / 9 - 11gr / 10 - 14gr
external power supply: 15 volts DC / 800mA
power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
dimensions: 18" x 7.2" x 14.3" / 460 x 183 x 365mm
weight: 24.2 lbs / 11 kg
Pick It MC3 Specs
output voltage (1 kHz): 0.4mV (3.54cm/sec)
channel separation (1 kHz): 30dB
tracking ability (315Hz): 70μm
frequency response: 20Hz-20kHz (+/- 1dB)
stylus type: hyper-spherical
stylus tip radius: 5 x 250μm
tracking force range: 1.8-2.2g (18-22mN)
recommended tracking force: 2g (20mN)
tracking angle: 20°
recommended load resistance: 100-220Ω
cartridge weight: 9.6g
break-in period: 30 hours
COMES WITH
Pick It MC3 (pre-mounted)
Connect It E RCA Phono cable
record clamp
dust cover
ABOUT TRUE BALANCED AUDIO
True Balanced Audio refers to a superior audio signal that results in higher sound quality with nearly zero background noise, check out our in-depth guide here
True Balanced gear can be utilized as both balanced (with the proper components and signal path) or non-balanced
True Balanced Audio requires a moving coil cartridge (MC) or the Pro-Ject Pick it Pro Balanced MM Cartridge
True Balanced Audio requires a balanced audio cable (5-Pin DIN, mini XLR / XLR, or RCA > Mini XLR) connected from the turntable to the preamp
True Balanced Audio requires a preamp that accepts balanced cables; you can output either XLR (recommended) or RCA from the preamp to speakers / amplifier
shop all Pro-Ject True Balanced
Brand:Pro-JectCategory:_STEREO-COMP-turntableSKU:tr-811Tags:Pro-Ject High-End, Pro-Ject True Balanced, Pro-Ject Turntables, turntablestype:Acrylic
high-end audiophile turntable made from a combination of unique materials including acrylic, Corian, carbon fiber, MDF, and metal.
includes Pick It MC3 Moving Coil Cartridge pre-installed ($680 value)
quiet belt drive operation w/ AC motor (DC driven AC generator)
Corian sub-chassis with magnetic suspension
resonance-optimized sandwich construction of platter w/ combination of MDF and vinyl layer + screw down record clamp
inverted main bearing with ceramic ball/plate
electronic speed control w/ 33/45 switching
carbon fiber Pro-Ject 9cc Evolution tonearm
Balanced mini XLR output & RCA/ground output
top grade RCA cable included (Pro-Ject Connect It E)
dust cover included
"Pro-ject's 6 PerspeX SB turntable delivers high end sound and functionality with stunning good looks. The acrylic plinth is the first thing you notice, a unique detail that is visibly appealing, that stands on three height adjustable TPE damped aluminum cones. The Corian sub-chassis rests on three magnetic fields that create a suspension system that avoids parasitic noise normally caused by con-ventional spring mechanisms. The resonance-optimized sandwich construction of the platter (a combination of MDF and vinyl layer + screw down record clamp) runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The pre-mounted 9" carbon fiber Pro-Ject 9cc Evolution tonearm rounds out this premium system. Comes complete with dustcover, counterweights, top grade RCA connection cable (Pro-Ject Connect It E), and pre-mounted Pick It MC3 cartridge." - TTL
TECH SPECS
speed: 33/45 (electronic speed change)
belt drive operation
platter: MDF/vinyl Sandwich (300mm diameter)
mains bearing: inverted stainless steel with ceramic ball/plate
wow & flutter: 33 +/-0.10% / 45 +/- 0.10%
speed drift: 33 +/-0.10% / 45 +/- 0.06%
signal to noise: 73dB
tonearm: 9" 9cc EVO Carbon
tonearm bearings with ABEC 7 ballraces
tracking force: 10 - 35mN
supplied counterweights: 5 - 7.5gr / 7 - 10gr / 9 - 11gr / 10 - 14gr
external power supply: 15 volts DC / 800mA
power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
dimensions: 18" x 7.2" x 14.3" / 460 x 183 x 365mm
weight: 24.2 lbs / 11 kg
Pick It MC3 Specs
output voltage (1 kHz): 0.4mV (3.54cm/sec)
channel separation (1 kHz): 30dB
tracking ability (315Hz): 70μm
frequency response: 20Hz-20kHz (+/- 1dB)
stylus type: hyper-spherical
stylus tip radius: 5 x 250μm
tracking force range: 1.8-2.2g (18-22mN)
recommended tracking force: 2g (20mN)
tracking angle: 20°
recommended load resistance: 100-220Ω
cartridge weight: 9.6g
break-in period: 30 hours
COMES WITH
Pick It MC3 (pre-mounted)
Connect It E RCA Phono cable
record clamp
dust cover
ABOUT TRUE BALANCED AUDIO
True Balanced Audio refers to a superior audio signal that results in higher sound quality with nearly zero background noise, check out our in-depth guide here
True Balanced gear can be utilized as both balanced (with the proper components and signal path) or non-balanced
True Balanced Audio requires a moving coil cartridge (MC) or the Pro-Ject Pick it Pro Balanced MM Cartridge
True Balanced Audio requires a balanced audio cable (5-Pin DIN, mini XLR / XLR, or RCA > Mini XLR) connected from the turntable to the preamp
True Balanced Audio requires a preamp that accepts balanced cables; you can output either XLR (recommended) or RCA from the preamp to speakers / amplifier
shop all Pro-Ject True Balanced
Brand:Pro-JectCategory:_STEREO-COMP-turntableSKU:tr-811Tags:Pro-Ject High-End, Pro-Ject True Balanced, Pro-Ject Turntables, turntablestype:Acrylic
Product information
COL-faed0d25d43a7e1e8a021ea4122ef7ae75d59ee8
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products



















