No image available
Other Products ｜TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
USD 392.02
Other Products / General Merchandise / Other Products
Key Features
Microphone/Line Input Switching
48V Phantom Power
Mic Input Pad
Microphone Gain
Compressor
4-Band EQ
Auto Level Control
Mute, Fader, Grouping
Overview
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Key Specs
Format
44.1 kHz / 48 kHz, 16-Bit / 24-Bit
Connector
4-Pin USB b-Type
Transfer Rate
USB 2.0 High-Speed (480 Mbps)
Analog In
Connector: Euroblock (Balanced) 3.81 mm Pitch
Minimum Input Level
-70 dBu
Maximum Input Levels
Microphone: +26 dBuLine: +24 dBuInput Impedance: 2.2 kOhms or Higher
Analog Output
Connector: Euroblock (Balanced) 3.81 mm Pitch
Nominal Output Level
+4dBu (When Ref.Level Set to Other Than -9 dBFS)+6dBu (When Ref.Level Set to -9 dBFS)
Maximum Output Level
Switchable:+15 dBu (Ref.Level: -9 dBFS)+18 dBu (Ref.Level: -14 dBFS)+20 dBu (Ref.Level: -16 dBFS)+22 dBu (Ref.Level: -18 dBFS)+24 dBu (Ref.Level: -20 dBFS)
Output Impedance
200 Ohms or Lower
RS-485
Connector: RJ-45Cables: Category 5e or Faster STP Cables
Ethernet
Connector: RJ-45Transmission Protocol: TCP/IPEthernet Standard: 100BASE-TXCables: Category 5e or Faster STP Cables
Power
AC 100 to 240 V, 50/60 Hz
Power Consumption
21 W
Operating Temperature Range
32 to 104°F / 0 to 40°C
Dimensions
19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm
Weight
6.6 lb / 3.0 kg
Packaging Info
Package Weight
10.04 lb
Box Dimensions (LxWxH)
21.6 x 17.2 x 5.9"
What's in the Box:
TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
Power Cord
16 x Euroblock Plugs
Cable Band Kit
Rackmount Screw Kit
Limited 1-Year Warranty for Parts, 90-Day Warranty for Labor
Brand:TASCAMSKU:MX-8ATags:audio interface, Matrix Mixer, System Processors, TASCAM, TASCAM Mixer, TASCAM MX-8A
View productMicrophone/Line Input Switching
48V Phantom Power
Mic Input Pad
Microphone Gain
Compressor
4-Band EQ
Auto Level Control
Mute, Fader, Grouping
Overview
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Key Specs
Format
44.1 kHz / 48 kHz, 16-Bit / 24-Bit
Connector
4-Pin USB b-Type
Transfer Rate
USB 2.0 High-Speed (480 Mbps)
Analog In
Connector: Euroblock (Balanced) 3.81 mm Pitch
Minimum Input Level
-70 dBu
Maximum Input Levels
Microphone: +26 dBuLine: +24 dBuInput Impedance: 2.2 kOhms or Higher
Analog Output
Connector: Euroblock (Balanced) 3.81 mm Pitch
Nominal Output Level
+4dBu (When Ref.Level Set to Other Than -9 dBFS)+6dBu (When Ref.Level Set to -9 dBFS)
Maximum Output Level
Switchable:+15 dBu (Ref.Level: -9 dBFS)+18 dBu (Ref.Level: -14 dBFS)+20 dBu (Ref.Level: -16 dBFS)+22 dBu (Ref.Level: -18 dBFS)+24 dBu (Ref.Level: -20 dBFS)
Output Impedance
200 Ohms or Lower
RS-485
Connector: RJ-45Cables: Category 5e or Faster STP Cables
Ethernet
Connector: RJ-45Transmission Protocol: TCP/IPEthernet Standard: 100BASE-TXCables: Category 5e or Faster STP Cables
Power
AC 100 to 240 V, 50/60 Hz
Power Consumption
21 W
Operating Temperature Range
32 to 104°F / 0 to 40°C
Dimensions
19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm
Weight
6.6 lb / 3.0 kg
Packaging Info
Package Weight
10.04 lb
Box Dimensions (LxWxH)
21.6 x 17.2 x 5.9"
What's in the Box:
TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
Power Cord
16 x Euroblock Plugs
Cable Band Kit
Rackmount Screw Kit
Limited 1-Year Warranty for Parts, 90-Day Warranty for Labor
Brand:TASCAMSKU:MX-8ATags:audio interface, Matrix Mixer, System Processors, TASCAM, TASCAM Mixer, TASCAM MX-8A
Product details
Key Features
Microphone/Line Input Switching
48V Phantom Power
Mic Input Pad
Microphone Gain
Compressor
4-Band EQ
Auto Level Control
Mute, Fader, Grouping
Overview
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Key Specs
Format
44.1 kHz / 48 kHz, 16-Bit / 24-Bit
Connector
4-Pin USB b-Type
Transfer Rate
USB 2.0 High-Speed (480 Mbps)
Analog In
Connector: Euroblock (Balanced) 3.81 mm Pitch
Minimum Input Level
-70 dBu
Maximum Input Levels
Microphone: +26 dBuLine: +24 dBuInput Impedance: 2.2 kOhms or Higher
Analog Output
Connector: Euroblock (Balanced) 3.81 mm Pitch
Nominal Output Level
+4dBu (When Ref.Level Set to Other Than -9 dBFS)+6dBu (When Ref.Level Set to -9 dBFS)
Maximum Output Level
Switchable:+15 dBu (Ref.Level: -9 dBFS)+18 dBu (Ref.Level: -14 dBFS)+20 dBu (Ref.Level: -16 dBFS)+22 dBu (Ref.Level: -18 dBFS)+24 dBu (Ref.Level: -20 dBFS)
Output Impedance
200 Ohms or Lower
RS-485
Connector: RJ-45Cables: Category 5e or Faster STP Cables
Ethernet
Connector: RJ-45Transmission Protocol: TCP/IPEthernet Standard: 100BASE-TXCables: Category 5e or Faster STP Cables
Power
AC 100 to 240 V, 50/60 Hz
Power Consumption
21 W
Operating Temperature Range
32 to 104°F / 0 to 40°C
Dimensions
19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm
Weight
6.6 lb / 3.0 kg
Packaging Info
Package Weight
10.04 lb
Box Dimensions (LxWxH)
21.6 x 17.2 x 5.9"
What's in the Box:
TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
Power Cord
16 x Euroblock Plugs
Cable Band Kit
Rackmount Screw Kit
Limited 1-Year Warranty for Parts, 90-Day Warranty for Labor
Brand:TASCAMSKU:MX-8ATags:audio interface, Matrix Mixer, System Processors, TASCAM, TASCAM Mixer, TASCAM MX-8A
Microphone/Line Input Switching
48V Phantom Power
Mic Input Pad
Microphone Gain
Compressor
4-Band EQ
Auto Level Control
Mute, Fader, Grouping
Overview
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Key Specs
Format
44.1 kHz / 48 kHz, 16-Bit / 24-Bit
Connector
4-Pin USB b-Type
Transfer Rate
USB 2.0 High-Speed (480 Mbps)
Analog In
Connector: Euroblock (Balanced) 3.81 mm Pitch
Minimum Input Level
-70 dBu
Maximum Input Levels
Microphone: +26 dBuLine: +24 dBuInput Impedance: 2.2 kOhms or Higher
Analog Output
Connector: Euroblock (Balanced) 3.81 mm Pitch
Nominal Output Level
+4dBu (When Ref.Level Set to Other Than -9 dBFS)+6dBu (When Ref.Level Set to -9 dBFS)
Maximum Output Level
Switchable:+15 dBu (Ref.Level: -9 dBFS)+18 dBu (Ref.Level: -14 dBFS)+20 dBu (Ref.Level: -16 dBFS)+22 dBu (Ref.Level: -18 dBFS)+24 dBu (Ref.Level: -20 dBFS)
Output Impedance
200 Ohms or Lower
RS-485
Connector: RJ-45Cables: Category 5e or Faster STP Cables
Ethernet
Connector: RJ-45Transmission Protocol: TCP/IPEthernet Standard: 100BASE-TXCables: Category 5e or Faster STP Cables
Power
AC 100 to 240 V, 50/60 Hz
Power Consumption
21 W
Operating Temperature Range
32 to 104°F / 0 to 40°C
Dimensions
19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm
Weight
6.6 lb / 3.0 kg
Packaging Info
Package Weight
10.04 lb
Box Dimensions (LxWxH)
21.6 x 17.2 x 5.9"
What's in the Box:
TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
Power Cord
16 x Euroblock Plugs
Cable Band Kit
Rackmount Screw Kit
Limited 1-Year Warranty for Parts, 90-Day Warranty for Labor
Brand:TASCAMSKU:MX-8ATags:audio interface, Matrix Mixer, System Processors, TASCAM, TASCAM Mixer, TASCAM MX-8A
Product information
COL-2df611f2bedefb485f622cd9eea2d046884bdf19
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
